注册 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

路雷米的博客

人生最难的就是在热爱和生计之间做选择, 愿每个人这一生 既对得起梦想又担得责任

 
 
 

日志

 
 

如何Enable WOL特性?  

2015-07-22 17:14:47|  分类: X86知识 |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |
Question
How to support wake on LAN (WOL)? What settings are necessary at BIOS and OS? 

Answer
Please follow the below guide to set up WOL function.
1. Please refer to here to disable EuP feature if the motherboard supports it.
2. To enable WOL in BIOS, please access “Power Managenet Setup” in BIOS setup manu to set “Resume By PCI/PCI-E/Lan PME” [Enabled], Save & Exit CMOS Setup.

3. To enable WOL in Windows, right-click “My Computer “ icon, select Properties, then click on “Device Manager”. Find your network adapters in the hardware list, right-click it and click Properties again.

4. Go to the Power Management tab and tick “Allow this device to bring the computer out of standby” item. 

5. Now head to the Advanced tab, which is full of options for your network adapter. First please set the value of “Shutdown wake up” to “On” ,second please set the value of “Wake Up Capabilities” to “Magic Packet & Pattern Match”, then click “OK” and everthing should be set.

6. You can use Magic Packet to wake up your system from a subnet different system. 
  评论这张
 
阅读(243)| 评论(0)
推荐 转载

历史上的今天

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2018